Can cedar be left untreated?
Left untreated, cedar shakes — individual planks of one of several varieties of cedar — will discolor and begin to soften, with a possibility of rot after about five years, depending on the climate. There are several options for covering cedar siding, including stain, a clear treatment or paint.7 Nov 2014
How is a mantle attached?
As with many other forms of mantle or shelf, a fireplace mantel can be commonly attached to the wall with screws or lag bolts. Bolts are screwed into the wall above the fireplace before a mantel is slotted straight onto it.
How do you apply polyurethane to a wood mantel?
Can you use cedar for a mantel?
Cedar is a knotty softwood so it’s soft enough to work with easily but durable enough for a mantel shelf. Northern white cedar and aromatic red cedar is indigenous to North America and not endangered, so the wood is widely available in several forms suitable for mantel shelves.
How do you remove a mantle from the wall?
Work the pry bar between the edge of the mantel and the drywall, starting at the lowest point, and slowly push the mantel away from the wall. If you are removing a ledge-style mantel, work from the bottom. However, if you are removing a surround, working at the base of the fireplace upward is best.
How is a mantle attached to a wall?
Standalone floating fireplace mantels can either be attached to a wall using lag screws or installed onto a back board, while mantels as part of a complete fireplace surround may be screwed into the wall using brackets.3 Feb 2021
How thick should my mantel be?
A depth of 7 inches is ideal for most mantels, as it allows plenty of room to accommodate decorative objects. Keep in mind that the top and the sides of the mantel should be the same depth. First, use a measuring tape and pencil to measure and mark the mantel top to size.
Should you seal cedar wood?
Cedar offers a durable option for exterior and interior building projects with natural resistance to rot and decay, so a protective finish is optional. If you want to enjoy the aroma of varieties such as Western Red Cedar and incense cedar, leave the wood unsealed.
What is the average thickness of a mantle?
The mantle is about 2,900 kilometers (1,802 miles) thick, and makes up a whopping 84% of Earth’s total volume.29 May 2020
Can you leave cedar natural?
Once cedar has turned gray, there is no natural way of going back. The only alternative at this point is to tone the wood with a stain or other coloring agent. Maintaining your cedar’s color is about choices, timing, and above all, the right type of treatment.
How do you secure a mantel?
How do you refinish a wood mantel?
Sand the entire mantel with medium-grit sandpaper followed by fine-grit paper until it is smooth and free of imperfections. Sand with the grain of the wood. Fill cracks and holes with wood filler that matches the color of your stain. Wipe the surface clean with a tack cloth.
Can you leave cedar unfinished?
If you leave cedar wood untreated, it will not succumb to the devastating effects of mold, rot and insect damage. However, it will lose its typically golden-brown color.
What holds up a fireplace mantel?
A fireplace mantel spans the top of a firebox and is often supported by legs; generally the deepest and heaviest section of the fireplace. It can also be floating, supported by corbels, and can appear well above the firebox opening or right in line with the opening.
How do you treat a wooden mantel?
You should re-oil surrounds every year using a good quality Oil and apply with a clean cloth and work the oil into the surface of the Wooden surround remove any excess after 10 minutes and then let the oil soak into the timber once its dried that’s all that has to be done and its ready to be refitted.29 Apr 2009
What type of wood should you use for a mantel?
Softwood. In most cases, hardwood is the best type of wood to use for mantels above fireplaces. Because of its hardness, it’s durable and lasts for years while maintaining the appearance of newness.
How do you finish a wood mantel?
Applying a straight tung oil, linseed oil or polyurethane can be a good (and simple) approach. Applying a lacquer shell after the oil-based finish is applied can give a mantel a shinier look.22 Feb 2013
How thick is a normal fireplace mantel?
A depth of 7 inches is ideal for most mantels, as it allows plenty of room to accommodate decorative objects. Keep in mind that the top and the sides of the mantel should be the same depth.
How do you finish a fireplace mantel?
Used Resourses:
- https://www.lowes.com/n/buying-guide/fireplace-mantel-buying-guide
- https://www.hunker.com/13416960/how-to-seal-cedar-wood
- https://www.ehow.com/info_12208967_kind-wood-make-mantel.html
- https://www.youtube.com/watch?v=_T3q3rhog8o
- https://brainly.in/question/17880490
- https://fireplaceuniverse.com/fireplace-mantels/
- https://www.hgtv.com/design/remodel/interior-remodel/make-a-floating-wood-mantel
- https://homeguides.sfgate.com/build-rustic-mantel-shelf-cedar-102644.html
- https://www.hgtv.com/design/remodel/interior-remodel/make-a-floating-wood-mantel
- https://www.seattletimes.com/business/real-estate/cedar-siding-should-be-treated-and-regularly-cleaned/
- https://www.thelumbershack.com/pages/fireplace-mantels
- https://www.trestlewood.com/blog/post/17/Antique-Wood-Mantel-Mantel-Finishing-Options/
- https://fireplaceuniverse.com/fireplace-mantels/
- https://homeguides.sfgate.com/removing-mantels-attached-drywall-30689.html
- https://www.custom-fireplaces.com/fireplace-anatomy-101-the-ultimate-guide-to-commonly-used-fireplace-terms/
- https://www.hunker.com/13401413/problems-with-cedar-wood
- https://www.thespruce.com/keep-cedar-wood-protected-4125926
- https://cottagelife.com/design-diy/how-do-you-extend-the-life-of-an-untreated-cedar-deck/
- https://www.castfireplaces.co.uk/hub/how-do-look-after-my-timber-surrround/
- https://homeguides.sfgate.com/restain-mantel-30920.html
- https://www.youtube.com/watch?v=92iYGk3wEzk
- https://fireplaceuniverse.com/how-to-remove-a-fireplace-surround-and-mantel/
- https://www.youtube.com/watch?v=agFW1jAEol0
